Catégories
Clamps Supa

Clamps Supa

 

Il y a 21 produits.

Affichage 1-21 de 21 article(s)

Référence: G1150

Marque: Doughty

Pivot Arm, 4kg | noir

Le bras pivotant est un bras multiposition polyvalent qui a été conçu pour compléter la Supaclamp dans les industries du film, de la vidéo et de la photographie.Caractéristiques principales :- Coude rotatif à 360° avec joint denté.- Rotation à 360° des extrémités de la rotule avec des goujons de 16mm.- Goujons taraudés pour ¼" et ¨ü".- Un seul levier...

Prix 163,00 CHF
Détails
Sur commande

Référence: G1160

Marque: Doughty

Supa Clamp, 20kg | argent

Disponible en aluminium naturel et en noir, la Supaclamp se fixe sur des poteaux ronds jusqu'à 50 mm et sur des surfaces plates jusqu'à 35 mm d'épaisseur.Doughty Engineering fabrique une gamme d'accessoires et d'embouts qui s'enclenchent dans la Supaclamp pour maintenir les lumières, etc.Ces accessoires peuvent être rapidement libérés en appuyant sur le...

Prix 28,00 CHF
Détails
Sur commande

Référence: G116001

Marque: Doughty

Supa Clamp, 20kg | noir

Disponible en aluminium naturel et en noir, la Supaclamp se fixe sur des poteaux ronds jusqu'à 50 mm et sur des surfaces plates jusqu'à 35 mm d'épaisseur.Doughty Engineering fabrique une gamme d'accessoires et d'embouts qui s'enclenchent dans la Supaclamp pour maintenir les lumières, etc.Ces accessoires peuvent être rapidement libérés en appuyant sur le...

Prix 31,00 CHF
Détails
Sur commande

Référence: G1171

Marque: Doughty

M12 x 35 Snap-in Socket, 20kg | Acier inox

A choice of two snap in threaded sockets. M10 x 30 & M12 x 35. Both sockets feature the quick release snap in fitting.TÉLÉCHARGEMENTS-- Spécification-- Page d'article du fabricantPHYSIQUEMENT- Capacité nominale CMU 20 kg- Couleur/Finition Acier inox- Poids 0,07 kg

Prix 11,00 CHF
Détails
Sur commande

Référence: G1172

Marque: Doughty

M10 x 30 Snap-in Socket, 20kg | Acier inox

A choice of two snap in threaded sockets. M10 x 30 & M12 x 35. Both sockets feature the quick release snap in fitting.TÉLÉCHARGEMENTS-- Spécification-- Page d'article du fabricantPHYSIQUEMENT- Capacité nominale CMU 20 kg- Couleur/Finition Acier inox- Poids 0,66 kg

Prix 11,00 CHF
Détails
Sur commande

Référence: G1177

Marque: Doughty

M10 x 25 Snap-in Rotating Stud, 20kg | laiton

Un bout uni M10 x 25 en laiton qui permet une rotation de 360 degrés.Fourni avec un écrou à ailettes, ce spigot est doté d'une bague moletée à saisir lors du serrage de l'écrou à ailettes. Le spigot et l'accessoire peuvent alors tourner ou être verrouillés en position avec la vis à ailettes.TÉLÉCHARGEMENTS-- Page d'article du fabricantPHYSIQUEMENT-...

Prix 9,90 CHF
Détails
Sur commande

Référence: G1178

Marque: Doughty

Snap-in Camera Spigot, 20kg | laiton

A brass snap in spigot with ¼" UNC thread as used on most Cameras & Flashes etc. This spigot features a knurled ring to grip whilst tightening, the spigot and accessory is then able to rotate or can be locked in position with the thumb screw.TÉLÉCHARGEMENTS-- Page d'article du fabricantPHYSIQUEMENT- Capacité nominale CMU 20 kg- Couleur/Finition laiton-...

Prix 6,80 CHF
Détails
Sur commande

Référence: G1179

Marque: Doughty

M10 Snap-in Low Profile Socket, 20kg | laiton

A brass snap in socket with an M10 thread. This spigot features a hex head and will freely rotate unless locked with the thumb screw.TÉLÉCHARGEMENTS-- Page d'article du fabricantPHYSIQUEMENT- Capacité nominale CMU 20 kg- Couleur/Finition laiton- Poids 0,1 kg

Prix 9,60 CHF
Détails
Sur commande

Référence: G1180

Marque: Doughty

Snap-in 16mm x 3/8" Spigot, 20kg | laiton

A brass snap in 16mm spigot with a 3/8 UNC thread. This spigot features a 16mm shank to be used with 16mm receivers and a 3/8" UNC thread as used with larger cameras and accessories.Two Supaclamps can be joined base to base with this spigot.TÉLÉCHARGEMENTS-- Page d'article du fabricantPHYSIQUEMENT- Capacité nominale CMU 20 kg- Couleur/Finition laiton-...

Prix 10,00 CHF
Détails
Sur commande

Référence: G1181

Marque: Doughty

Snap-in 16mm x 1/4" Spigot, 20kg | laiton

A brass snap in 16mm spigot with a ¼ UNC thread. This spigot features a 16mm shank to be used with 16mm receivers and a ¼" UNC thread as used with cameras and accessories. Two Supaclamps can be joined base to base with this spigot.TÉLÉCHARGEMENTS-- Page d'article du fabricantPHYSIQUEMENT- Capacité nominale CMU 20 kg- Couleur/Finition laiton- Poids 0,1 kg

Prix 10,00 CHF
Détails
Sur commande

Référence: G1182

Marque: Doughty

Snap-in 3/8" x 1/4" Spigot, 20kg | laiton

A brass double ended snap in 16mm spigot with a ¼" and 3/8" UNC thread. This spigot features two 16mm shanks to be used with 16mm receivers and a ¼" UNC thread one end and a 3/8" UNC thread the other. Two Supaclamps can be joined base to base with this spigot.TÉLÉCHARGEMENTS-- Page d'article du fabricantPHYSIQUEMENT- Capacité nominale CMU 20 kg-...

Prix 10,00 CHF
Détails
En stock